Bearing puller with two adjustable arms Unior 680/2

Pullers

Bearing puller with two adjustable arms Unior 680/2

Brand: Unior

41,11 – 158,52 €

3 pieces available now

The Unior 680/2 two-arm puller is used to remove bearings, bushings, pulleys and gears from shafts. The arms set in two positions and the lever-action claws fit closely under the …

Available variants

Bearing puller with two adjustable arms Unior 680/2 (90 × 90 mm)

ERP code: 4108 · Catalogue number: 612603

Promjer Ø: 90 mm Navoj: M10×1

41,11 €

Out of stock

Bearing puller with two adjustable arms Unior 680/2 (130 × 160 mm)

ERP code: 4109 · Catalogue number: 601762

Promjer Ø: 160 mm Navoj: M14×1,5

89,00 €

1 pcs

Bearing puller with two adjustable arms Unior 680/2 (190 × 230 mm)

ERP code: 4047 · Catalogue number: 601763

Promjer Ø: 230 mm Navoj: M20×2

115,00 €

1 pcs

Bearing puller with two adjustable arms Unior 680/2 (250 × 300 mm)

ERP code: 3394 · Catalogue number: 601764

Promjer Ø: 300 mm Navoj: M22×2

158,52 €

1 pcs

Bearing puller with two adjustable arms Unior 680/2 (90 × 90 mm)

ERP code: 4108 · Catalogue number: 612603

Promjer Ø: 90 mm Navoj: M10×1

41,11 € Out of stock

Bearing puller with two adjustable arms Unior 680/2 (130 × 160 mm)

ERP code: 4109 · Catalogue number: 601762

Promjer Ø: 160 mm Navoj: M14×1,5

89,00 € 1 pcs

Bearing puller with two adjustable arms Unior 680/2 (190 × 230 mm)

ERP code: 4047 · Catalogue number: 601763

Promjer Ø: 230 mm Navoj: M20×2

115,00 € 1 pcs

Bearing puller with two adjustable arms Unior 680/2 (250 × 300 mm)

ERP code: 3394 · Catalogue number: 601764

Promjer Ø: 300 mm Navoj: M22×2

158,52 € 1 pcs

The Unior 680/2 two-arm puller is used to remove bearings, bushings, pulleys and gears from shafts. The arms set in two positions and the lever-action claws fit closely under the part being removed. The body is made of carbon steel (premium flex plus) and the arms of chrome vanadium steel; the puller is drop-forged, fully hardened and tempered. The surface is trivalent chrome plated to ISO 1456:2009 and the spindle is blackened. The range covers four sizes — 90 × 90, 130 × 160, 190 × 230 and 250 × 300 mm — with M10×1 to M22×2 spindle threads. Sold as a single tool. Note: not intended for use with pneumatic tools; always oil and centre the spindle on the middle of the part.